Multi-Shaft Auger Machine

 

Multi-shaft is a method of casting instead of a concrete pile wall, and the agitation of grout liquid

and the original stratum, has been widely used for the construction of land-side protection walls in various construction works, including water supply and drainage, river improvement and subways.

 

In traditional methods, one line of the single shaft auger heads was used. But now, with multi shaft auger machines, more than one slurry wall can be built using a few auger rods with agitation wings at the end part.

 

Multi shaft auger machines are multi-purpose machines that enhance profitability, because such agitation rods overlap one another and increase profitability and sure standing water property and they can be used for works involving H-beams and sheet piles.

 

 

Features

 

1. Plural number of soil cement piles can be made at a time

 

2. Mixing blade are overlapped each other to ensure water-tightness of the diaphragm

 

3. Multi-purpose system for diaphragm wall, soil consolidation, H-beam or sheet pile installation

 

4. Low noise, vibration free

 

5. Effective operation in various ground conditions such as soft soil, boulders and solid rock

 

6. Various applications : Earth retaining wall, diaphragm wall, soil improvement etc.

Specification：

 

 

Drive Unit	Number of Rod Shaft	Pitch between Shafts (mm)	Electric Motor	Rotation Speed	Rated Torque	Weight
Model			KW	r/min	kn*m	(ton)
YCX-1200-M2	2	900/1000/1200/1400	110kw× 2	24.8	42	16
YCX-850-3-M2	3	850	90kw × 3	18.2	47.2	15.6
YCX-700-4-M2	4	500x500	110kw× 2	18.2	29	15
YCX-700-5- M3	5	500	90kw × 3	18.2	28.3	19
YCX-850-6- M4	6	850	90kw × 4	15.6	36.7	21.6

Note: The machine can be custom as per client working status requirement.